DCTM problem ?

Discussion and questions about hub software
SysMan
Junior Member
Posts: 13
Joined: Tue Sep 15, 2009 12:08 pm
Location: Russia, Sankt-Petersburg

DCTM problem ?

Post by SysMan » Tue Sep 15, 2009 12:28 pm

Hello!

I'm writing from scratch ADC-Hub software under OpenVMS...
Now, I have some skeleton and test it with StrongDC++ clients. At the moment I have some problem which I cannot resolving:
client A sending to Hub (get file list): DCTM 0002 0003 ADC/0.10 1814 3759097641 , this message is resending by my Hub to target client B, but client A don't receive anything.

Sorry for short and dumb description of the problem, but probably someone will point me to right direction.


Thanks!
Top
Quicksilver
Member
Posts: 56
Joined: Mon Aug 17, 2009 9:32 pm

Re: DCTM problem ?

Post by Quicksilver » Tue Sep 15, 2009 1:25 pm

tons of possibilities...

1. was the correct IP in the INF ?
Top
SysMan
Junior Member
Posts: 13
Joined: Tue Sep 15, 2009 12:08 pm
Location: Russia, Sankt-Petersburg

Re: DCTM problem ?

Post by SysMan » Thu Sep 17, 2009 9:14 am

Hello!

Resolved the problem.

Thanks!
Top
Pietry
Senior Member
Posts: 328
Joined: Tue Dec 04, 2007 7:25 am
Location: Bucharest

Re: DCTM problem ?

Post by Pietry » Thu Sep 17, 2009 10:19 am

Since you posted out your problem and solved it, perhaps you can also post the solution, it might be interesting for other developers if they come across it. So please when you get the chance post the exact problem and solution you have.
Thanks a lot !
Just someone
Top
SysMan
Junior Member
Posts: 13
Joined: Tue Sep 15, 2009 12:08 pm
Location: Russia, Sankt-Petersburg

Re: DCTM problem ?

Post by SysMan » Tue Sep 22, 2009 10:50 am

Hi!

About of the resolving the problem ... never mind, it was a dumb programming error.
Top

Return to “Hub Software”

Who is online

Users browsing this forum: Google (Crawler) and 0 guests